Hi everybody, I recently purchased a UC-560, and I was wondering if it is possible to set up a call routing based on time via CCA o CLI, for example: from 9:00 to 15:00 mobile calls use FXO 0/1/0 port and from 16:00 to 20:00 use FXO 0/1/1. And e...
I'm having issues with the operator console for my UC560. Everything works fine, I go out to grab a bite to eat.. and this is now showing.This phone has been disconnected.Status: RegisterRejectStatusEx: STapi307_sue > Error Invalid TAPI client passw...
so, what i want to do is a kind of night service on my uc520. that is, when a call comes in outside our office hours (on whatever extension, globally so to say), I just want a "Unfortunately, you've reached us outside of normal business hours" messa...
HiI have user who has 2 phones. One in the office and one at home conencted (a SPA525g connected via SSL VPN). Is it possible for the user to share an extension number but set the home phone not to ring if the user is in the office? Basically the Bos...
I have a freeswitch server and it is up and running - serving a softphone successfully. I tried to connect a linksys spa941 and it just always "fast busy" signals me when I try to dial. The phone is connected and registered to the freeswitch serve...
Hi All,I was told their is currently no Cisco PoE injector available for the SPA500 series phones...is this true?If so, has anyone had any experience with a third-party power injector?Our scenario is where we need to power two SPA500 phones from a no...
I'm having an issue concerning a Polycom connected to an FXS port on a UC560. I configured the appropriate SCCP configuration to give the Polycom conferencing features and it works fine (snippets of the configuration below).voice-port 0/0/2 timeouts...
I am running into a strange problem on my UC520 with a PRI. If somebody call ours main number the call goes to a blast group which rings a handful of phones. All phones display the caller id number but not the name. Once somebody in the blast group ...
Hi all,Can someone give me a reason why at the download site below:https://upload.cisco.com/cgi-bin/swc/fileexg/main.cgi?CONTYPES=UC500The UC560 Software Pack is version 8.0.2 (which contains the 7.1.3 CUE) however, the CUE localisation prt1 files ...
Hi,After upgrading CUE to 8.0.2 the service engine doesn't load. UC520#service-module integrated-Service-Engine 0/0 statusService Module is Cisco Integrated-Service-Engine0/0Service Module supports session via TTY line 2Service Module is failedServic...
Dear All,Hope that everythings goes well with you all. I have a problem with Call Accounting in UC560. I configured the following:gw-accounting file primary ftp 194.34.12.244/ username 1234 password 12345 acct-template callhistory-detail maximum buff...
About a month ago, I upgraded a UC520 system using the 8.0.2 pack. After doing this, cli access and configuration assistant access was working fine, but the CUE GUI at https://10.1.10.1/Web/Common/Login.do was no longer working. I ended up finding ...
Hello,We often need to use dual language on UC500 units (520/540/560) and updated written information would be very helpful for delegating this procedure.There is scattered information and some manuals available on this forum but they may not be full...
I am wondering what happens to any out-of-band configuration after a license upgrade on a UC500 system.For the ephone-dn reserved and unassigned ranges, for example on a 48 user UC520, the ranges are as follows:user extensions: 10-117, unassigned: 11...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
