When I call out on my sip trunk I would like my main company number to show insead of the sip number. Does anyone have a step-by-step on how to do this? Thx.
How would I get the SPA962 to generate CoS values without configuring the phone to use a VLAN so the simple switch it is attached to that doesn't understand multiple VLANs but DOES understand CoS values provides the proper treatment to the traffic fr...
How can I change the outgoing caller-id on my SIP trunk? I forget the command and where to do it. Right now, the name of the phone gets sent out instead of the company name. I want the company name to go out on all phones. Thx
Hi,Question Part 1:I am running the newest firmware v5.2.10 on my SPA-2102 and it hung twice during a one week period. I noticed it hung after my firewall logged either a TCP SYN FLOOD attempt or a Smurf Attack attempt, I caught this happenning just ...
Hello,I actually use an SPA2102 with 2 SIP accounts. The first one, on the line 1 use QOS by tagging RTP packets :Network SettingsSIP ToS/DiffServ Value:SIP CoS Value:[0-7]RTP ToS/DiffServ Value:RTP CoS Value:[0-7]Network Jitter Level:lowmediumhighve...
HiI have just set up a SPA3102 on my internal network, and have connected it to the PSTN.I want to be able to route incoming calls on the PSTN to a IP phone (a Snom 360), and also make outgoing PSTN calls on the Snon. For the moment, it is just one I...
I using a SPA 8000 with a Panasonic wireless phone system (pots)Can I upgrade to a SPA 9000 and still use the the 8000 with the 9000 for the pots lines?I need 5 pots lines with the SPA 9000.Steve
Hello!I have a problem with this error message java.lang.NullpointerExeption in cca 2.0.(1).I attached the config for UC 500.Can anyone help me!regardsSOLO
I have heard details about Cisco Unified CME 8.0 on the following page:http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/feature/guide/Cisco_Unified_IPPhones_69xx_Series.htmlFeatures added to Cisco Unified CME 8.0:Support for Cisco 6900 series phon...
by mistake I deleted the flash memory I reinstalled the IOS in order to install the software package UC520-7.0.3.zipthe problem is when I attempt to upgrade using the Cisco configuration asistant application in the 49 per cent of the ipgrade procc...
Hey everyone ,I have a working 2 site (mutisite setup , setup with CCA 2.1) All features work fine except I have a very interesting problem.Internal calls and transfers work site to site. But when I get an incoming call via SIP, I can not transfer ...
Hi all, I've a problem and already checked the config - I think - like a previous discussion on this forum and until now I cant make a conference call with two outgoing bri calls.When I try to establish the conference the UC500 says cant complete th...
This is long over due because I've been living with this issue for a while.Time to ask.I have a SPA3102 with a local VoIP service. I do not have it attached to an active PSTN line. For some strange reason the unit is resetting itself. After 4 minutes...
Hello,I have a customer who is in the Home Health industry and they need their AA to be accessable for callers who are physically disabled.Right now, they have a bunch of options for callers; press 1 for this and 2 for that, so on and so on. But if a...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: