Voice Systems and Accessories - Small Business

CSR has UC520W (8 user) with integrated 3 port FXO.   Using Verizon FiOS for Internet and 4 analog lines. CSR experiencing low volume on voice calls, even when handset volume is all the way up.CSR voice stations are CP-7945 and CP-7941. We have bypas...

Can we close the conference meet me when the initiator leaves theconference?Thanks for your answer

Using SPA9000 and SPA 9x1/2 IP phones, what is the priority of the dial plans that can be set in each device? Should the IP phone have something like (xx.) in the active line(s) and have the rest done by the 9000?I do not see a comment on this in the...

I have a recpetionist phone, a 524sg, and while on a call there is a choice to put the call on hold. When a second call to the same number comes in the choices change to only 'answer'. When she clicks answer the other call is disconnected.How can we ...

Hello!I have a partner in the DTV business who complain that the SPA2102 bugs their multicast transmissions through sending a ethernet PAUSE fram when receiving multicast in a rate it cannot handle although the SPA2102 is not (or at least should not)...

HiI'm also interested on a firmware update that will allow the SPA941 to authenticate through the LDAP.Is there a way to do it?As a University we have plenty of those SIP Phones that we can't use.p.sOur Call Manager isCisco Unified CM AdministrationS...

Hello,I want to use the auto attendand to transfer calls without voice messages, based on time slots. For example, daytime script transfer to 402, nightime script transfer to 403.If I use the script<aa><form id="dir" type="node"><audio src="prompt1" ...

Hi,Just wondering if there are any plans to add PPTP Client Support to the WRP400 Like the WRT54G3G has for the USB Modem Connectivity in future releases?Thanks,David

I have a client with a UC520, would like to have a small site with 3 phones to share phone system.Currently they have a point-to-point between the two sites.  I set the main ste up already for 4 digits.Can someone please point me in the right directi...

I have problem with transferred calls...Incoming calls --> SPA 9000 --> SPA 400 --> to announce --> BXFER to IP phones --> SNOM M3  --> after 30s calls automatically finish.

My current AA will detect fax signalling and automatically forward the call to the extension that I designate that has a fax machine on it.How do I do this with my UC520 and CCA 1.9?Thank You!Matthew Castrigno