I have a SPA400 with 3 FXO ports ran into it that all get answered by the AA. I also am using the SPA400 for VM. I know that is going against design considerations and want to know if that is why I'm experiencing this issue: The first call comes in and gets answered by the AA fine. A second and third call comes in and the AA answers but all you hear is silence. We know the 2nd and 3rd call hits the system because the pots LED on the front of the SPA400 are lit. Also, even though the AA is silent, you can still dial an extension and get connected to a phone. Thoughts?
Are you running latest firmware on the devices? This is the first time I hear about this issue. I suggest the following. test first line, then disconnect it and test second line and then with the third, would like to understand whether it has to do with capacity or other thing
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...