Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Barge for SPA52x phones

Hi,

I want to figure out, if barge is possible to use with SPA52x phones.

I know that for cBarge Octo Line is a prerequisite. Barge on Shared Lines seems to work only on SIP phones.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmebarge.html#wp1016021

Is the correct conclusion, that barge is not available on SPA52x phones?

regards,

Alfred

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Barge for SPA52x phones

The SPA5xx series phones only support dual line is the issue.  So thats a phone HW limitation.

6 REPLIES
Community Member

Re: Barge for SPA52x phones

SPA5XX phones do not support octo-lines.


Thanks,


Marcos

Community Member

Re: Barge for SPA52x phones

Hi Marcos,

In other words: no barge feature fpr SPA5xx Phones.

Correct?!

Re: Barge for SPA52x phones

I would say correct, but am confirming to be sure.

Community Member

Re: Barge for SPA52x phones

Hi Steve,

Do you have some infos, if this feature will come in a future phone-load release? Or is this restriction due to the SPCP protocol?

kind regards,

Alfred

Re: Barge for SPA52x phones

The SPA5xx series phones only support dual line is the issue.  So thats a phone HW limitation.

Community Member

Re: Barge for SPA52x phones

thanks Steve

806
Views
0
Helpful
6
Replies
CreatePlease to create content