We have MTNL's BRI line terminated on VOICE Router and shows MULTIFRAME also. My outgoing calls are working through BRI line with proper caller ID.
We want to know, when an incoming call is comming, the calling party mobile number is being displayed correctly, but called party number of the BRI is not being shown, while we debug it through debug isdn q921 and q931.
Does the normal BRI shows the called party number also. Please confirm.
I have added my debug output for your reference. Calling Number - 8879628934 and Called Number - 26875175 (Not Being Dispalyed)
014991: Apr 7 12:05:16.888: ISDN BR0/1/0 Q931: RX <- SETUP pd = 8 callref = 0x01 Sending Complete Bearer Capability i = 0x8090A3 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0x89 Exclusive, B1 Calling Party Number i = 0x2183, '8879628934' Plan:ISDN, Type:National 014992: Apr 7 12:05:16.892: ISDN BR0/1/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x81
This call gets disconnected automatically on router itself and doesnot land on IP Phone.
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...