Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

block specific incoming call number FXO

I try to block incoming calls from specific number on fxo

here's what I did :

voice translation-rule 11000

rule 1 reject /**********/    (I enter my phone number)

!

!

voice translation-profile CALL_BLOCK

translate calling 11000

!

dial-peer voice 50 pots

description ** incoming dial peer **

incoming called-number ^AAAA$

port 0/1/0

!

dial-peer voice 51 pots

description ** incoming dial peer **

call-block translation-profile incoming CALL_BLOCK

call-block disconnect-cause incoming invalid-number

incoming called-number ^AAAA$

port 0/1/1

!

dial-peer voice 54 pots

description ** FXO pots dial-peer **

call-block translation-profile incoming CALL_BLOCK

call-block disconnect-cause incoming invalid-number

destination-pattern A0

port 0/1/0

no sip-register

!

dial-peer voice 55 pots

description ** FXO pots dial-peer **

destination-pattern A1

port 0/1/1

no sip-register

!

I tried 2 methods, one on my fxo port 0 and one of my fxo port 1,

when i call port 0 everything's normal but when I call port 1, it takes like 5 rings to get to the phone and it shows anonymous as the caller Id instead of my phone number

why it's not working ?

7 REPLIES
Hall of Fame Super Gold

block specific incoming call number FXO

Apply the translation-profile under voice-port, not dial-peer.

New Member

block specific incoming call number FXO

in this ???

when i try to, i can't enter the cmd line

!

voice-port 0/1/0

trunk-group ALL_FXO 64

cptone CA

connection plar opx 296

description Configured by CCA 4 FXO-0/1/0-Custom-OP

caller-id enable

!

voice-port 0/1/1

trunk-group ALL_FXO 64

cptone CA

connection plar opx 296

description Configured by CCA 4 FXO-0/1/1-Custom-OP

caller-id enable

!

voice-port 0/1/2

trunk-group ALL_FXO 64

cptone CA

connection plar opx 296

description Configured by CCA 4 FXO-0/1/2-Custom-OP

caller-id enable

!

voice-port 0/1/3

trunk-group ALL_FXO 64

cptone CA

connection plar opx 296

description Configured by CCA 4 FXO-0/1/3-Custom-OP

caller-id enable

!

New Member

block specific incoming call number FXO

when i refer to this it says to user dial-peer : https://supportforums.cisco.com/thread/2020843

Hall of Fame Super Gold

block specific incoming call number FXO

I can tell you what works, then it's up to you  to try it or not.

New Member

block specific incoming call number FXO

like I told you when I try to enter the command line under Voice-port cisco ios won't let me enter the command..

Hall of Fame Super Gold

Re: block specific incoming call number FXO

That is what command?

Anyway that method of blocking call might not work with FXO at all.

New Member

Re: block specific incoming call number FXO

call-block translation-profile incoming CALL_BLOCK

call-block disconnect-cause incoming invalid-number

I follow this doc :http://www.cisco.com/en/US/docs/ios/12_2t/12_2t11/feature/guide/ftgwrepg.html#wp1038689

1405
Views
0
Helpful
7
Replies
CreatePlease to create content