*** Warning: If you are using CCA only, or are not a "UC Specialized" partner, modifications though CLI can void support for CCA when calling into support in the future. If you have questions about this, or need asistance please call into support. ***
In CLI, you can add the following translation:
voice translation-profile CALLER_ID
translate calling 4000
voice translation-rule 4000
rule 1 /^\(.*\)/ /90\1/
This translation profile would then need to be applied to the incoming dial-peer, or possibly the trunk group.. Best place depends on the incoming trunk. (PRI, SIP, FXO)
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...