I'm having issues with the call forwarding all feature on a UC540. A user wants to set call forwarding all to an external number (their personal cell phone) so when an incoming call to their number connects, the system will forward the call to their external number. I've made some test calls and have verified that the call will connect (user is able to hear the ring and pick up) but there is no audio both ways. All other features such as inbound and outbound calls work fine. There have been no changes on the UC500 when this issue was noticed, and I suspect there may be an ISP issue here due to previous issues that were similar to this. Their ISP have responding by saying that they are not receiving any audio from our side. I've run a debug ccsip messages and debug voice ccapi inout and have attached it to this thread but I'm having trouble interpreting the results.
I can see that the calls are connecting from the debug, but unsure of where to look to determine if audio is working. Can anyone assist me on this?
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...