Solved: cannot make calls (outgoing or incoming)

Reprovoid · ‎02-12-2014

I'm sorry for reposting this but In the original discussion , I accidentally marked one of the answers as correct and I don't know how much that affects someone taking another look at the discussion.

I have a problem with calls going through to the sip provider as g729 whereas they now require g711alaw. I cannot make outbound calls. I configured the uc540w via CCA and though I specified g711alaw In the sip trunk , It didn't work.

I tried adding g711alaw to one of the dial-peers to see If that would make a change.In doing so , I can no longer make any Incoming calls to any extensions.I removed the configuration but It hasn't changed anything.I have no idea what I've done.

I ran a debug ccsip message and am receiving Warning: 304 "Media Type(s) Unavailable" q.805 error=65.

I would really appreciate any assistance.I've attached the ccsip message debug and the running config.

Daniele Giordano · ‎02-12-2014

The config seems ok. If you have problem you can follow the same check list:

- debug dial peer to get dp used in outgoing calls

- check dp config used

- fix dp config

Let me know the result.

BR

View solution in original post

Daniele Giordano · ‎02-12-2014

What is the dial-peer matched during incoming and outgoing calls?

You can check this using debug voip dialpeer.

In your config there are many voip dial-peer without codec config.

Add "voice-class codec 1" or "codec ..." to all dp.

Regards.

Reprovoid · ‎02-12-2014

Hi.I've tried adding the dial peer but no change.Does It have to be done on all dial peers for It to work correctly ? I don't understand how the config changed.incoming calls were fine.The only thing i did was add codec g711alaw to one dial peer and then all incoming calls stopped.

I've attached the dialpeer debug.

Daniele Giordano · ‎02-12-2014

debug dialpeer output:

000459: Feb 12 14:52:46.479: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Calling Number=25251000, Called Number=25251000, Peer Info Type=DIALPEER_INFO_SPEECH

000460: Feb 12 14:52:46.479: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=25251000

000461: Feb 12 14:52:46.479: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)

000462: Feb 12 14:52:46.479: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=25251000, saf_enabled=1, saf_dndb_lookup=1, dp_result=-1

000463: Feb 12 14:52:46.479: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:

Result=NO_MATCH(-1)

000464: Feb 12 14:52:46.479: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=35314403500, Called Number=, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

000465: Feb 12 14:52:46.479: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=NO_MATCH(-1) After All Match Rules Attempt

000466: Feb 12 14:52:46.479: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=-1

000467: Feb 12 14:52:46.483: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=35314403500, Called Number=, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

000468: Feb 12 14:52:46.483: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=NO_MATCH(-1) After All Match Rules Attempt

000469: Feb 12 14:52:46.483: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=-1

000470: Feb 12 14:52:46.483: //-1/67B7E54F8278/DPM/dpAssociateIncomingPeerCore:

Calling Number=35314403500, Called Number=25251000, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

000471: Feb 12 14:52:46.483: //-1/67B7E54F8278/DPM/dpAssociateIncomingPeerCore:

Result=Success(0) after DP_MATCH_INCOMING_DNIS; Incoming Dial-peer=3013

000472: Feb 12 14:52:46.483: //-1/67B7E54F8278/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0

000473: Feb 12 14:52:50.307: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Calling Number=25251000, Called Number=25251000, Peer Info Type=DIALPEER_INFO_SPEECH

000474: Feb 12 14:52:50.307: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=25251000

000475: Feb 12 14:52:50.307: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)

000476: Feb 12 14:52:50.307: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=25251000, saf_enabled=1, saf_dndb_lookup=1, dp_result=-1

000477: Feb 12 14:52:50.307: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:

Result=NO_MATCH(-1)

000478: Feb 12 14:52:50.307: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=99477241, Called Number=, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

000479: Feb 12 14:52:50.307: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=1040

000480: Feb 12 14:52:50.307: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0

000481: Feb 12 14:52:50.311: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=99477241, Called Number=, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

000482: Feb 12 14:52:50.311: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=1040

000483: Feb 12 14:52:50.311: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0

000484: Feb 12 14:52:50.311: //-1/6A000105827C/DPM/dpAssociateIncomingPeerCore:

Calling Number=99477241, Called Number=25251000, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

000485: Feb 12 14:52:50.311: //-1/6A000105827C/DPM/dpAssociateIncomingPeerCore:

Result=Success(0) after DP_MATCH_INCOMING_DNIS; Incoming Dial-peer=3013

000486: Feb 12 14:52:50.311: //-1/6A000105827C/DPM/dpMatchSafModulePlugin:

dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0

Incoming dial-peers matched are 3013 and 1040 but no codec are configured:

dial-peer voice 3013 voip

description AA-AA

translation-profile incoming AA-AA_Called_18

session protocol sipv2

session target sip-server

incoming called-number 25251000

voice-class sip dtmf-relay force rtp-nte

dtmf-relay rtp-nte

ip qos dscp cs5 media

ip qos dscp cs4 signaling

no vad

dial-peer voice 1040 voip

description **CCA*cyprus*Mobiles**

translation-profile outgoing PSTN_Outgoing

preference 1

destination-pattern 99T

session protocol sipv2

session target sip-server

voice-class sip dtmf-relay force rtp-nte

dtmf-relay rtp-nte

ip qos dscp cs5 media

ip qos dscp cs4 signaling

no vad

Please add codec or voice-class codec command.

BR

Reprovoid · ‎02-12-2014

Thank you very much for your help.Incoming calls are working fine.I have no access to the office at the moment to test outgoing.

Could you take a quick look at the new running config and tell me If I'll have any problems with outgoing calls not transcoding to g711alaw ?

Daniele Giordano · ‎02-12-2014

The config seems ok. If you have problem you can follow the same check list:

- debug dial peer to get dp used in outgoing calls

- check dp config used

- fix dp config

Let me know the result.

BR

Reprovoid · ‎02-12-2014

ok.Thanks again!