Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CCA 2.1 Nat issues

Hi All

Im having major issues with CCA2.1 when trying to Nat ports to an sbs server. I have tried this at a few different sites and most of the time the change wipes out the PPPOE internet connection. Sometimes I can log in using version 2.0 and repair the issue. However most of the time I need to go through the whole config again.

What could be causing this?

Maybe best to go back to CCA2.0

1 REPLY
Cisco Employee

Re: CCA 2.1 Nat issues

Hi Travis,

What is your PPPoE configuration? PPPoE-Static IP, PPPoE-DHCP? I tried this in my lab and both the NAT and WAN PPPoE settings were preserved.


If possible, please unicast the screenshots of your WAN and NAT configs in CCA, and the CCA troubleshooting logs to tesaka@cisco.com

Rgds,

Tomoo

Instructions on how to collect CCA troubleshooting log are below:

https://supportforums.cisco.com/docs/DOC-9559

1052
Views
0
Helpful
1
Replies
CreatePlease to create content