Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CCA and different MOH per phone/line

Is there a way, using CCA, to configure MOH groups?

I've got 2 clinics, each with their own DID but sharing one UC560.  I've split the DN's so that clinic 1 is on x300-399 and clinic 2 is on x400-499.  Can each DN range have it's own MOH?

Thanks.

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

CCA and different MOH per phone/line

Hello James,

Unfortunately, this is not possible within CCA.

Thanks,

-john

3 REPLIES
New Member

CCA and different MOH per phone/line

Hello James,

Unfortunately, this is not possible within CCA.

Thanks,

-john

New Member

Re: CCA and different MOH per phone/line

Thanks John,

I'm guessing I'll be stuck doing it with MOH Groups through the CLI.

Thanks again,

James

New Member

Re: CCA and different MOH per phone/line

Hello James,

You can refer to this support forum post about MoH limits and such: https://supportforums.cisco.com/message/3086136#3086136

There is also a link in there to the CLI configuration, but I'll put that here in case anyone else stumbles across this post: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemoh.html#wp1022742

Thanks for the rating.

-john

297
Views
0
Helpful
3
Replies
CreatePlease to create content