We fired our technology guy for stealing and he reset our Cisco UC540 and SonicWalls to factory default.
Our environment was the following: WORK had a TZ205-W with 192.168.34.x and the UC540W was 192.168.34.3 on LAN only. We only need the UC540 for calls and voicemail to email etc. not networking as the TZ205 does the rest.
WORK@ (Home office) has a cisco phone, and a TZ205W with 192.168.134.x network.
We need assistance configuring these for our Cisco Phones. We are not proficient in Sonic Wall and we are not proficient in Cisco but any assistance we would appreciate.
Our scenario is :
WORK 192.168.34.x WORK2 192.168.134.x
VPN to access all resources. Cisco requires TCP, SCCP, TFTP
Our serial numbers are: 192.168.34.x TZ205W- C0EAE42B8BEC 192.168.134.x TZ205W- C0EAE42B7BDC
We are a charity and we do not have a lot of resources, but I do know we did buy these less than 1.5 year ago.
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...