Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco UCS560

Currently have a client with a Cisco U560 acting as FW, DHCP, and UC. The WAN interface is a bottleneck since it can only provide 20-35Mbps even through there is a Comcast ISP with 100Mpbs(download) and 20Mbps(upload). We're planning on putting a Cisco ASA 5505 and take all of the ACLs, DHCP, etc. from the UC560. I know the UC560 needs an external IP and so does the Cisco ASA. I'm thinking the following:

                                                ----------------UC560(leave this configuration as is)

Comcast ISP ------Cisco SG300

                                                ----------------Cisco ASA 5505

Has anyone done this? Any input would be greatly appreciated!

1 REPLY
Hall of Fame Super Red

Cisco UCS560

Hi Jo,

You will probably get more help if you move this

post over to the uc500 sub-forum at this location;

https://supportforums.cisco.com/community/netpro/small-business/voiceandconferencing/sbcs-uc500

You can use the actions panel on the top right hand side of this

page to move this

Cheers!

Rob

"Seek it out and ye shall find  " 

- OneRepublic

395
Views
0
Helpful
1
Replies
CreatePlease to create content