Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Clock Sync - UC560 / CUE

Just wondering if the difference in time is normal between CME/CUE

- here is a UC560 for one of my clients-

UC560#sho clock
09:59:27.263 PST Mon Sep 27 2010
UC560-Link-murrel#serv integ 0/0 sess
Trying, 2002 ... Open
se-30-1-1-2# sho clock
09:59:40.431 PDT Mon Sep 27 2010

CUE config-

se-30-1-1-2# sho run
Generating configuration:

clock timezone America/Los_Angeles

hostname se-30-1-1-2

line console
  length 0

system language preferred "en_US"

ntp server prefer

CME- (ntp and clock config)

UC560#sho run | inc ntp
ntp master
ntp server prefer
UC560#sho run | inc clock
clock timezone PST -8
clock summer-time PST recurring

UC560#sho ntp ass

  address         ref clock       st   when   poll reach  delay  offset   disp
~     .LOCL.           7      5     16   377  0.000   0.000  0.220
*~       2    987   1024   377 87.622   4.424 11.256
* sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured
UC560#sho ntp stat
Clock is synchronized, stratum 3, reference is
nominal freq is 250.0000 Hz, actual freq is 249.9934 Hz, precision is 2**28
reference time is D04B46F2.39AC0A01 (09:38:10.225 PST Mon Sep 27 2010)
clock offset is 4.4240 msec, root delay is 91.95 msec
root dispersion is 188.26 msec, peer dispersion is 11.25 msec
loopfilter state is 'CTRL' (Normal Controlled Loop), drift is 0.000026118 s/s
system poll interval is 1024, last update was 1503 sec ago.

Help appreciated as always.

CreatePlease to create content