voice register dn 1 number 255 allow watch name SIP-Iphone no-reg label 255 mwi
voice register pool 1 id mac 0000.0000.0000 number 1 dn 1 presence call-list dtmf-relay rtp-nte username 255 password sip2 codec g711ulaw no vad
voice service voip allow-connections sip to h323 allow-connections sip to sip no supplementary-service sip moved-temporarily no supplementary-service sip refer fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw h323 call service stop sip registrar server expires max 3600 min 120
I can register 255 with softphone but when I try to use Mobility 8.0 I recieve : "Voicemail service unavailable on this server" message. I checked with CCA and could not see 255 extension on voicemail. What must be the configuration. A sample config would be very good
David is correct - Cisco Mobility is not supported with CME. In addition, not only is it not supported, but it is unlikely to work as CME and CUCM use different APIs to interface with applications. We do understand the need for a mobile client for integration with CME, and it is something that we are looking at, but there is nothing that I can share at this point.
I got very excited for a minute. Would be currious to know who makes the decisions on making this work for CME. Seams like it would be a prudent use of the investment in Mobility 8.0 to make it cross platform to CME. Put in a good word for me :). I would even be willing to send a case of beer to the develper (thier choice).
One issue we have is that SNR does not work well in blast groups becouse of the risk of a mobile users voicemail grabing the call should it float out of service for a moment (AT&T this is very common). This seams like great way to truly connect mobile users.
I took some time today to set up the iPhone with L2TP to our Soincwall gateway to see how that VPN component would work. The good news is that the VPN client in the iPhone does work over both WiFi and 3G and should support G711u for throughput. The only issue I see is that the L2TP iPhone client does not automaticaly connect. The user would need to go in and turn on VPN quite often when going in and out of wifi spots or when comming out of a locked state on the iPhone. No serious 3rd party VPN client tools in the apple app store to solve this issue either.
If a user is always within a wifi area than just take a 7925G with them and skip the mobility 8.0 cleint all together (seams like a novity item) . If the iPhone VPN client gets enhancements (like auto connect or dead peer detecton) possible in the 4.0 OS release this summer that this is a home run solution.
I think Cisco needs to Buy Skype and Microsoft need to buy Facebook. Together cisco and micorosft would rule the world.
Certainly adding support for CME into the mobility software is one option we are considering, but there are other options as well, and we are not at a point where we are ready to share any more details. In the meantime, we are also looking at enhancements for SNR and a few other options.
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...