Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

configuring ssl vpn on uc 560 with command line

guys,

does anyone have manual or instruction on how to configure ssl vpn?i already have ezvpn created, so when i tried using CCA. it gives me an error.

i need to create ssl vpn for spa525g phone.

let me know...

thank you

4 REPLIES

Re: configuring ssl vpn on uc 560 with command line

You should be able to have both at the same time via CCA.  I don't have a guide that is UC specific, but there is how you configure SSL VPN's via CLI.

It has a lot of information, but it is very good.

http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htwebvpn.html

New Member

Re: configuring ssl vpn on uc 560 with command line

so how do you configure the phone spa 525g?

does the ssl vpn gateway ip have to be different that the wan port ip?

New Member

Re: configuring ssl vpn on uc 560 with command line

I've just done this with a UC540.  Use the CCA 2.2.1 SSL VPN Wizard, but first make sure that the phone load is at 7-4-3.

2214
Views
0
Helpful
4
Replies
CreatePlease to create content