I'm trying to finalize the configuration of a UC540 connected via VPN to a remote PBX...
The VPN circuit terminates on a Cisco ASA 5510 and Legacy PBX have 2 ISDN port connected to a Patton SN4554 gw; now, I want to find the best configuration, avoiding if possible any problems with CCA!!! Indeed, already for the VPN I have worked with the CLI :-(
I have not checked whether I can work on gw as a server and connect the UC500 with a sip trunk or if I have to follow another path; however, ultimately I would like some advice, ideas, configuration to simplify things and to work the UC500 as a satellite of the legacy PBX. The essential goals are to divert some external calls to the remote site and manage the possible transfers / calls between offices.
There would be several things to add but for now I will stop here!
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...