Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Direct Specific Extensions to Specific Outgoing FXO

We have a site with 6 FXO lines.  They want extensions 201 and 202 to make outgoing calls on 0/1/0, 0/1/1, or 0/1/2.  All other calls should go out 0/1/3, 0/2/0, and 0/2/1.

What is the easiest way to accomplish this?

3 REPLIES
Community Member

Re: Direct Specific Extensions to Specific Outgoing FXO

The easiest way to do this is to configure the system in hybrid mode. Extensions 201 and 202 will have a unique button-to-line mapping (key system), while the other extensions can do PBX with the rest of the PSTN lines.

Thanks,

Marcos

Community Member

Re: Direct Specific Extensions to Specific Outgoing FXO

Are there instructions anywhere showing how to set that up?

Thanks for the help.

Community Member

Re: Direct Specific Extensions to Specific Outgoing FXO

Yes, the complete First Look v1.4 Lab Guide has this information in Appendix B. Also, the scenario based labs have an example that you can use as a reference:

https://www.myciscocommunity.com/docs/DOC-1525

Thanks,


Marcos

2968
Views
0
Helpful
3
Replies
CreatePlease to create content