Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Directly Dialing a Phone's Speakerphone/Intercom

We have a client that is requesting to be able to dial directly to the speakerphone (intercom) of another phone. We know that we can configure an intercom button on the phones to do that, but if there are 20 phones in the office, the receptionist would have to have an additional 20 buttons just for that purpose. Is there a key combination that can be pressed before dialing the extension that will do the same thing? Ex: 6101 would automatically go to the voicemail of extension 101.

We currently use CCA and CME. Yep, UC5xx. Phones are SPA509G. I can dial directly to voicemail, but my question is regarding dialing directly to speakerphone/intercom. Does this help clear things up?

4 REPLIES
Hall of Fame Super Gold

Re: Directly Dialing a Phone's Speakerphone/Intercom

You will need to configure additional ephone-dn (these can be single line), configured as intercom, You can assign these as overlay to the main DN.

Note: I have no idea if that is possible with CCA. No issue with CLI.

New Member

Directly Dialing a Phone's Speakerphone/Intercom

Can anyone explain how this is done with CLI?

New Member

Directly Dialing a Phone's Speakerphone/Intercom

In CCA, setup an extension as a Dialable Intercom on each phone and it will work.

Hall of Fame Super Gold

Directly Dialing a Phone's Speakerphone/Intercom

Check "configuring Intercom" chapter in CME administrator guide.

597
Views
0
Helpful
4
Replies
CreatePlease to create content