Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Cisco Employee

Disable CDP on UC500 WAN port

How can I disable CDP on my WAN port. Preferably CCA.

2 REPLIES
Community Member

Re: Disable CDP on UC500 WAN port

There is no way to do this in CCA. You will need CLI:

UC500#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

UC500(config)#int fast 0/0

UC500(config-if)#no cdp enable

UC500(config-if)#end

Marcos

Community Member

Re: Disable CDP on UC500 WAN port

Remember that CDP should only be disabled on your UC500 WAN port if the WAN port is not connected to a SR520, SA520, or SA540. If your WAN port is connected to a SR520, SA520, or SA540, CDP needs to be enabled on the UC500 WAN port for CCA to work properly.

603
Views
0
Helpful
2
Replies
CreatePlease to create content