We have been experiencing erratic call behavior on our ip phones since sometime now. For every 1 out of 3 incoming calls, the call from the outside goes directly to the user's voicemail or gets d/c even though the phone was not busy. We get an email notification from our provider (speakeasy) for an incoming call and at times we see the incoming notification but the phone does not ring!
Sometimes just taking the receive off hook and putting it back gets the call to ring in.
The same is experienced while dialing internal extensions too.
Another instance is when a previous call has just ended on phone A and if you happen to dial the same phone within the next 5-6 seconds, it goes to the user's voicemail
Can someone please explain why this is happening and a solution for the same?
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...