Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Existing TFTP Server

Hello,

We have a UC520 installed in our network.

Data VLan: 192.168.10.x

Voice VLan: 10.1.10.x

Phones are working just fine.

We are trying to implement an imaging server on our data VLan that runs TFTP. The problem is, is that the TFTP service on the imaging server won't start because it see an existing TFTP server (UC520) on the subnet.

I'm confused though because doesn't the TFTP server on the UC520 only broadcast itself on the Voice VLan? If not, is there any way to modify the config to make it do so?

Thanks.

Brian

Everyone's tags (4)
4 REPLIES
Hall of Fame Super Gold

Existing TFTP Server

You can configure an ACL to block TFTP on the data VLAN interface.

New Member

Existing TFTP Server

But then the TFTP traffic for my image server would be blocked as well correct, since it resides on the data vlan?

-Brian

Hall of Fame Super Gold

Existing TFTP Server

No. ACL blocks traffic in/out router, and nothing else.

New Member

Existing TFTP Server

ok. So would I block TFTP traffic inbound to the Data VLAN?

332
Views
0
Helpful
4
Replies
CreatePlease to create content