Cisco Support Community
Community Member

fax-to-email, for several users (with 3xBRI- and no FXO-Ports)

Hello, I have a uc520 with 15 users and one standalone fax.

I´ve generated several extensions for fax which are all forwarded to the standalone fax 901.That works ...

Now I want to configure the following User Chris with the extension 100 and his own fax-extension 101

should get his fax in

In the same way it should work for Sarah with the extension 210, the fax-extension 201 and the


Each of the 15 users got a fax-extension xx1and there should be the possibility to print the fax to the

real fax-extension 901.

The UC520 is located in Germany and i use ISDN with three BRIs and there are no FXO-Ports.

The standalone fax is connected to FXS 0/0/0.

I found many How-Tos, but no example to do this with multiple fax-extensions and no FXO-ports.

Any ideas for a solution?

In the first step I thought it would be good to create a mailbox for every fax-extension xx1 and make

them fax-enabled.

Is this the right way or a dead-end?

Kind regards, DetNit

Everyone's tags (4)

Re: fax-to-email, for several users (with 3xBRI- and no FXO-Por

Here is a reference document I use to setup fax on-ramp for PRI circuits.  It shouldn't be any different for BRI.


Adam Compton

CreatePlease to create content