four port FXO VIC card not taking inbound calls...?
We added a PSTN for voicemail via CCA (configure>voicemail>voicemail pstn #), but the UC does not answer the line. When we called the PSTN number's we discovered that two of the six lines are not answered by the UC's AA. Those two lines are on the VIC card and are the last two of six. The first four work fine.
Under Configure>telephony>trunks>pstn trunks, it shows Total ports 8 (4 built in, 4 VIC), so it sees the card.
Aside from a physical line cross connect mix-up issue, is there something else we need to do or configure to get those last two lines working.
Under our dial plan all incoming numbers currently go to a BLAST group.
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...