Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Hardware requirements to setup up remote teleworker. 7960 plus uc540 and...?

Looking for recommended  hardware and software companents as applicable to set up 2 remote home work sites  to utilize 7960 phones.  Customer is open to purchasing other phones if it will improve quality and simplify.  users have existing dsl or cable internet access.  currently has a uc 540 with 8 phones at main office.

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: Hardware requirements to setup up remote teleworker. 7960 p

For these phones, your looking at the SR520 for the remote site.  See the SBCS Smart Designs:  Under Application Notes, specifically the remoter teleworker note:

http://www.cisco.com/web/partners/sell/smb/tools_and_resources/smart_business_comm_system.html

Re: Hardware requirements to setup up remote teleworker. 7960 p

Since ASA5xxx is not part of the SBSC Suite, it isnt in any of our docs and limited support, but it can be done manually.   Not supported in CCA either.

Steve

3 REPLIES

Re: Hardware requirements to setup up remote teleworker. 7960 p

For these phones, your looking at the SR520 for the remote site.  See the SBCS Smart Designs:  Under Application Notes, specifically the remoter teleworker note:

http://www.cisco.com/web/partners/sell/smb/tools_and_resources/smart_business_comm_system.html

Community Member

Re: Hardware requirements to setup up remote teleworker. 7960 p

One last follow up question so that I can understand scope of products

,  is the ASA5505 an equal product that can be used?

Re: Hardware requirements to setup up remote teleworker. 7960 p

Since ASA5xxx is not part of the SBSC Suite, it isnt in any of our docs and limited support, but it can be done manually.   Not supported in CCA either.

Steve

560
Views
0
Helpful
3
Replies
CreatePlease to create content