Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How is PLAR configured on a FXS port of a UC520?

How is PLAR configured on a FXS port of a UC520 with code UC520-8.0.0? I am using a Viking E-40 Series Entry analog telephone plugged into an FXS port. It is a line powered speaker phones designed to provide two-way hands free communication from an entry door. I want the E-40 to automatically ring a hunt group when it goes off hook.

Everyone's tags (7)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: How is PLAR configured on a FXS port of a UC520?

3 REPLIES

Re: How is PLAR configured on a FXS port of a UC520?

Community Member

Re: How is PLAR configured on a FXS port of a UC520?

Thank you Steve.

Here is the final working commands I used. The hunt group was 505 and door extension was 301.


voice-port 0/0/0
timeouts ringing infinity
connection plar 505
station-id name Front Door
station-id number 301


ephone-hunt 5 sequential
pilot 505
list 201, 202, 203, 204, 208, 215, 243, 222
final 201
timeout 8, 8, 8, 8, 8, 8, 8, 8
no-reg pilot
statistics collect
description Front Door

Community Member

How is PLAR configured on a FXS port of a UC520?

How about CUCM 6.1 -I have the same e40 device

Do I do it via the new partition and CSS

Is the sation ID the Attendant DN?

I bascialy need to be able to dial into the viking e40 and press the button so it dials out.

3198
Views
0
Helpful
3
Replies
CreatePlease to create content