All the inbound calls are going to a shared extension which has two phones in it. On busy/no answer it goes to an Auto Attendant. Time to time it goes straight to Auto attendant without even trying to go to Shared Extension. We have checked everything we could the DnD is not enabled, phones are up and running, I can call phone’s extension without any problems. Every time it happens we have to reboot UC320 and then it works normally. There are 5 analog lines in.
Suggest the next time that this happens that you log into the configuration utility, enable logs on your FXO ports. Make the inbound call on FXO, then look at/capture the logs before power cycling the system. Suggest opening a case with the Cisco Small Business Support center:
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...