Integration with traditional PABX

[Thiago Cella]

Hi friends,

I´ve never installed and configured the UC320,I did the topology to explain the scenario.So i have some doubts:

- Can I integrate the UC320 with PABX Traditional?

- Can make a call, source the analog phone connected to PABX to IP phone connected to UC320 ?

- Can I register phones and do the calls over VPN?

Tks

[rbordner · Accepted solution]

Thiago,

In reference to your attached uc320-topology.jpg, the UC320W only supports SPA500 series IP Phones and 1 connected analog device connected to the fxs port. PAP2T is not an option to register to the UC320W.

If you are looking to add SIP trunking to a traditional PBX, then SPA8000 and SPA8800 should be considered and used to register to SIP provider.

Regards,

Randy

[Thiago Cella]

Ok thanks Man!!