05-20-2011 05:11 AM - edited 03-21-2019 04:07 AM
Hi, Sorry for my english
I´m trying to configura 2 different sip trunks on my uc520.
Config
dial-peer voice 79939 pots authentication username 139600 password 7 <removed> realm asterisk dial-peer voice 30000 pots authentication username 3400005618 password 7 <removed> realm 193.22.119.20
sip-ua credentials username 139600 password 7 <removed> realm asterisk credentials username 3400005618 password 7 <removed> realm 193.22.119.20 no remote-party-id retry invite 2 retry register 10 timers connect 100 registrar 1 ipv4:193.22.119.20 expires 90 registrar 2 dns:sip03.vozelia.com expires 90 auth-realm asterisk sip-server ipv4:193.22.119.20
uc500-sintelec#sh sip-ua register status
--------------------- Registrar-Index 1 ---------------------
Line peer expires(sec) registered P-Associ-URI
================================ ========== ============ ========== ============
139600 -1 70 no
3400005618 -1 50 yes
--------------------- Registrar-Index 2 ---------------------
Line peer expires(sec) registered P-Associ-URI
================================ ========== ============ ========== ============
139600 -1 114 no
3400005618 -1 48 no
I would configure registrar index 1 for line 3400005618 only and registrar index 2 only for 139600.
It is this possible?¿
Sip provider for Registrar index 2 only accepts 139600.
Thanks in advance!
Jose
05-24-2011 08:20 AM
Hi??
Regards!
05-24-2011 09:58 AM
What IOS version are you using?
There is a long discussion here:
https://supportforums.cisco.com/message/3087569#3087569
about doing this.
Thank you,
Darren
05-24-2011 11:54 PM
Hi again!
uc500-advipservicesk9-mz.151-2.T2
This is my ios version.
Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide