We have the following configuration for shared lines as overlays on UC520. I tried to change the overlayed lines to octo-lines for barge support but this is not configurable. I'm not sure if this would even be a good idea but was going to see the outcome.
All shared lines require the ability to be able to barge. Is there an easier way for me to accomplish this goal? Any help would be great!
ephone-dn 101 number 3200 caller-id block no huntstop ! ! ephone-dn 102 number 3200 preference 1 caller-id block no huntstop ! ! ephone-dn 103 number 3200 preference 2 caller-id block no huntstop ! ! ephone-dn 104 number 3200 preference 3 caller-id block
ephone 1 mac-address 001A ephone-template 1 type 7960 no missed-calls button 1:9 2o101,102,103,104 ! ephone 2 mac-address 001A ephone-template 1 type 7960 button 1:8 2o101,102,103,104 ! ephone 3 mac-address 001A ephone-template 1 type 7960 button 1:7 2o101,102,103,104 ! ephone 4 mac-address 001A ephone-template 1 type 7960 button 1:6 2o101,102,103,104
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...