08-05-2009 09:04 AM - edited 03-21-2019 01:23 AM
Guys,
Does anybody have experience with SL-1 signaling type? My provider can only support SL-1, do you think it's going to comptabile with UC 520? Normally, the ISDN switch type is NI2 or NI.
Anyone has sample output?
Thank you
Solved! Go to Solution.
08-05-2009 10:52 AM
Are you using CCA do this this? You should be able to select the ISDN switch type there to be DMS100.
If not, the command is...
isdn switchtype primary-dms100
08-05-2009 09:24 AM
I believe this should work if you have the switch type as DMS100. SL-1 is a nortel protocol.
08-05-2009 10:49 AM
so, this should work fine with UC520, right. Yes, SL-1 is a nortel protocol.
I am not sure what is the comptatible command line for ISDN switch type.
08-05-2009 10:52 AM
Are you using CCA do this this? You should be able to select the ISDN switch type there to be DMS100.
If not, the command is...
isdn switchtype primary-dms100
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: