I have a problem with my CE520 switches when the main UC520 unit is rebooted.
I have two CE520s attached to the UC520 and whenever I reboot the UC520 the trunk ports on the CE520s both go into a err-disabled state with an error of one-way traffic detected. I have to shutdown the trunk ports and restart to recover.
It makes remote after hours rebooting of the UC520 impossible.
Any ideas how to fix this so that the trunk ports don't shutdown?
I tracked down the problem as occuring with your current version of IOS, uc500-advipservicesk9-mz.124-24.T.bin. I tested with several other IOS versions, including all those that are included in the software packs available from the community download page. No other versions displayed the problem. If there is no reason that you chose to use an Early Development IOS version, indicated on the Cisco download site, I suggest downloading and installing one of the UC500 software packs from this site. Otherwise, you will need to open a TAC case so that a bug can be filed and officially tracked for this IOS version.
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...