Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

register a SPA phone first installation

Hi,

we just strated our new UC560, first installation and wonder how to register a SPA phone? We gave an extension number to the phone and it doesn't show on the phone. In the CCA we see the phone and its mac adress but we are unable to regiister it

4 REPLIES
New Member

register a SPA phone first installation

You need to make sure that you have the phone loads in place and that the tftp-server is serving the proper files for that phone. It sounds like you've already got the ephone-dn and ephone in place. When you reset the phone, what happens? Also, is this the only phone not working or do they all not work?

New Member

Re: register a SPA phone first installation

Hi,

Please let us know what message does the phone display and what software version are you running on the UC and the phone and type of spa phone.  Did you upgrade from the factory software?

While the phone is rebooting could you also capture these debugs:

debug tftp events

debug ephone register

From CCA, in the troubleshoot drawer you'll find Generic Debugs.  Type the commands into the window and click begin,then restart the phone after the phone hangs stop the debug and copy and paste in your reply.

Regards,

Marvin

New Member

Re: register a SPA phone first installation

You might want to try doing a factory reset on the phone.  Hit the settings button, then hit device administration and then select factory reset.

http://www.cisco.com/en/US/products/ps10033/products_qanda_item09186a0080a35e75.shtml

New Member

register a SPA phone first installation

Also, if you wanted to give me remote access to your router, I would be happy to take a look at it.

-Darnell

425
Views
0
Helpful
4
Replies
CreatePlease to create content