Does anyonw know if the WIP3xx phone is supported in the latest release of SBCS? to me is seems stupid that Cisco would put thier name on a phone and then call it a "3rd party" phone. the integration of this phone into the SBCS platform would help the partner community beat out all the xTels of the world
Currently the WIP3xx phones do not support SPCP or SCCP. They only support SIP as a call control mechanism. That is why they are 3rd party for the SBCS platform. I am not aware of any road map to integrate this feature (SPCP or SCCP) as the WIP3xx phones were designed to work with the SPA9000 (or any SIP pbx). The closest you will come with a wireless IP phone that is compatible with the SBCS is probably the 7921G. It works with CUCM 6.0. I do not have one here in my lab, so I can not confirm that it is compatible with the UC5xx systems. I can, however, confirm that the UC5xx platform does include a phone load for this model. I therefore can all but guarantee that it is compatible. Hope this helps.
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...