Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

setting up corlist

hi guys,

i have question regarding corlist setup. can we setup this based on the ephone-dn instead of ephone. for example, there are 2 offices, office A has extension 100 and 101 and the phone number is 111-2222. then office B has extension 200 and 201 and the phone number is 333-4444. is there a way from the phone that if someone picks either extension then the it only uses specific outgoing number?

does this make sense?

thank you

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: setting up corlist

It is possible. Something like this:

!
dial-peer cor custom
name office-a
name office-b
!
dial-peer cor list call-office-a
member office-a
!

dial-peer cor list call-office-b
member office-b

!
!
dial-peer voice 20 pots
description 111-2222
corlist outgoing call-office-a
!

dial-peer voice 30 pots
description 333-4444
corlist outgoing call-office-b
!
!
ephone-dn 1
corlist incoming call-office-a
!
ephone-dn 2
corlist incoming call-office-b
!

If you are using the CCA config, it gets a little more complicated, since you have to work with existing COR lists, but the idea is the same. Hope this helps.

Marcos Hernandez
Technical Marketing Engineer
Cisco Systems, Inc.

1 REPLY
Community Member

Re: setting up corlist

It is possible. Something like this:

!
dial-peer cor custom
name office-a
name office-b
!
dial-peer cor list call-office-a
member office-a
!

dial-peer cor list call-office-b
member office-b

!
!
dial-peer voice 20 pots
description 111-2222
corlist outgoing call-office-a
!

dial-peer voice 30 pots
description 333-4444
corlist outgoing call-office-b
!
!
ephone-dn 1
corlist incoming call-office-a
!
ephone-dn 2
corlist incoming call-office-b
!

If you are using the CCA config, it gets a little more complicated, since you have to work with existing COR lists, but the idea is the same. Hope this helps.

Marcos Hernandez
Technical Marketing Engineer
Cisco Systems, Inc.

3334
Views
0
Helpful
1
Replies
CreatePlease to create content