Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

SF 200-24P switch compatible with UC560

Is it possible to run a SF 200-24P switch on a UC560 thru the expansion port?

I already have a SF 200-24P and I am trying to avoid buying another switch?

Anyone have a document or knowledge of this?

Thanks

Keith

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Hello Keith,Yes it is

Hello Keith,

Yes it is possible. You need to switch the port to trunk or change the smartport role.

In CCA also it is very easy. The switch is supported in CCA also. You may check the CCA (3.2.1) admin guide:

http://www.cisco.com/c/dam/en/us/td/docs/net_mgmt/cisco_configuration_assistant/version3_2_1/administration_guide/cca_sbcs_admin_guide.pdf

HTH,

Alex

*Please rate helpful posts

 

1 REPLY
Cisco Employee

Hello Keith,Yes it is

Hello Keith,

Yes it is possible. You need to switch the port to trunk or change the smartport role.

In CCA also it is very easy. The switch is supported in CCA also. You may check the CCA (3.2.1) admin guide:

http://www.cisco.com/c/dam/en/us/td/docs/net_mgmt/cisco_configuration_assistant/version3_2_1/administration_guide/cca_sbcs_admin_guide.pdf

HTH,

Alex

*Please rate helpful posts

 

49
Views
0
Helpful
1
Replies
CreatePlease to create content