I have the following config in my ephone-dn's (all of them)
ephone-dn 14 octo-line number 7503 secondary 612***7503 no-reg primary label 7503 John Doe description John Does Phone name John Doe mobility snr 91612******* delay 2 timeout 15 call-forward busy 7599 call-forward noan 7599 timeout 20 huntstop channel 3 translation-profile incoming CallBlocking hold-alert 30 originator
the trouble is that the SNR timeout of 15 seonds does not work, the SNR will continue to ring the mobile number past both the SNR timeout of 15 seconds and the call-forward noan timeout of 20 untill the mobile phones voicemail pickes up at 30 seconds (the most AT&T will allow).
So should i remove the other standalone cfwd-noan statement then since it is included in the SNR statement? Also how does the effect the call-forward busy statement. Should that stement be int he SNR line to take effect correctly such that the huntstop channel of 3 is valid?
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...