Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

SPA303 - spcp register token rejected

Need help, I added SPA303 phones to UC540 system and I get the error SPCP register token rejected when phone comes up. 303G is not available on phone type listing in CCA so I use 502G, 504G instead (closest in terms of button features). I tried using 303 firmware and use load command to associate 504G with 303 firmware but get the same error. Any insight is appreciated.

2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

Re: SPA303 - spcp register token rejected

Hi Oliver,

Forging a SPA502 or other phonetype to handle 303 won't work, but here's the good news: we've recently released Software Pack v8.1(0) for UC540 which has native support for all the current SPA phones using their latest firmware (v7.4.7)

Please dowwnload the UC540 Software Pack v8.1(0) from the bellow link and perform an upgrade.

http://www.cisco.com/cisco/software/release.html?mdfid=282819521&softwareid=282762907&release=8.1%280%29&rellifecycle=&relind=AVAILABLE&reltype=latest

Cheers,

Zsolt

Cisco Employee

Re: SPA303 - spcp register token rejected

Dear Sir;

Looks like you are using old firmware and CCA combination which does not support the phone. Please advice on the UC500 SW pack used as well as the CCA version. If you upgrade to latest available, should not have the issue you are experiencing.

Regards

Alberto

4 REPLIES
New Member

Re: SPA303 - spcp register token rejected

Hi Oliver,

Forging a SPA502 or other phonetype to handle 303 won't work, but here's the good news: we've recently released Software Pack v8.1(0) for UC540 which has native support for all the current SPA phones using their latest firmware (v7.4.7)

Please dowwnload the UC540 Software Pack v8.1(0) from the bellow link and perform an upgrade.

http://www.cisco.com/cisco/software/release.html?mdfid=282819521&softwareid=282762907&release=8.1%280%29&rellifecycle=&relind=AVAILABLE&reltype=latest

Cheers,

Zsolt

New Member

Re: SPA303 - spcp register token rejected

Thanks, Zsolt! UC540 upgrade to latest software pack did the trick.

New Member

Re: SPA303 - spcp register token rejected

Hi Oliver,

I'm glad that it worked out for you.

Regards,

Zsolt

Cisco Employee

Re: SPA303 - spcp register token rejected

Dear Sir;

Looks like you are using old firmware and CCA combination which does not support the phone. Please advice on the UC500 SW pack used as well as the CCA version. If you upgrade to latest available, should not have the issue you are experiencing.

Regards

Alberto

1487
Views
0
Helpful
4
Replies
CreatePlease to create content