Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

SPA504G Handset/Speaker Volume

Is there any way to increase the volume of the 504G other than the volume control button on the phone?  My customer is complaining that the max volume setting obtained is not loud enough.

14 REPLIES

Re: SPA504G Handset/Speaker Volume

What firmware are you running?  There are a few volume fixes for the SPA phones in the 7.4.3 firmware.

Community Member

Re: SPA504G Handset/Speaker Volume

They are running 7.1.3, but I seem not to be able to update the phone loads using CCA 2.2.1; drag and drop does not work.

Re: SPA504G Handset/Speaker Volume

What error are you getting when you do this?  You must have no TFTP servers running when you do this.  Also, disable the firewall and antivirus on your computer.  I have tried this before with CCA 2.2.1, so I know that it works. 

Also, make sure you are using the .bin file.

One other thing, can you provide a show flash: all

Thanks

Community Member

Re: SPA504G Handset/Speaker Volume

I just get a circle with a line through it when I try to drag onto the topology view.  No other tftp servers are running, and disabling firewall/antivirus makes no difference.

Re: SPA504G Handset/Speaker Volume

Do you get an error at the bottom of the screen at all?  Can you post your CCA log?

Community Member

Re: SPA504G Handset/Speaker Volume

No errors at all... it won't let me drag it onto the topology view...

How do I get at the CCA log to post it?  It shows nothing reagrding my attempt to drag and srop, though... just the basic startup messages.

Re: SPA504G Handset/Speaker Volume

Help -> Support Information -> Troubleshooting Log.

Try it one more time, then get the log.

Community Member

Re: SPA504G Handset/Speaker Volume

log attached.

Re: SPA504G Handset/Speaker Volume

I see that little circle with the line through it too...but when I release the file on the UC540 topologu ICON, it works.

Did you try that too?

Community Member

Re: SPA504G Handset/Speaker Volume

Yes, I've tried that, but nothing happens.  You're dropping it directly on the uc540 icon, right?

Re: SPA504G Handset/Speaker Volume

Can you manually copy the file to flash using tftp?

From a UC500...

copy tftp flash:/phones/5x5

(pick the file etc)

config t

tftp-server flash:/phones/5x5/spa5x5-7-4-3.bin alias spa5x5-7-4-3.bin

telephony-service

load 501G spa5x5-7-4-3

load 502G spa5x5-7-4-3

load 504G spa5x5-7-4-3

load 508G spa5x5-7-4-3

load 509G spa5x5-7-4-3

no create cnf-files
create cnf-files
Reboot the phone.
Community Member

Re: SPA504G Handset/Speaker Volume

I did that, after giving up on the drag-and-drop.  The phone firmware is updated, but I don't notice any significant improvement in the volume.

Re: SPA504G Handset/Speaker Volume

Would you mind opening a case for this problem?  If there is still a volume problem, it would best to get a case opened for this.

Community Member

Re: SPA504G Handset/Speaker Volume

My client's complain of the same issues with these handsets.

Upgrading the phone firmware to latest version makes some improvement, but most times they still think it's too quite or 'tinny'.

I am interested in hearing Cisco's response to your post.

Stacy

1568
Views
0
Helpful
14
Replies
CreatePlease to create content