Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

SPA50XG BLF

I have a SPA508G, and I have gotten BLF to work great on unused lines, and I am trying to figure out how to set up BLF status on an extension or line in use. What I mean by this is I have an extension set up and in use, and I would like to assighn the status light to a different extension displaying the status of that line, not the one I am on. The admin manual only give instuctions on assighning BLF to unused line buttons on the phone. Any help or ideas would be appreciated.

Everyone's tags (5)
1 REPLY
Cisco Employee

SPA50XG BLF

Hi Computer Business,

I don't really follow what you're trying to accomplish. BLF can only be configured on an unused extension of the monitoring phone.

Perhaps the following will be of use to you:

BLF on Asterisk:

   https://supportforums.cisco.com/docs/DOC-9958 [Unused buttons are configured the same way as SPA500S buttons]

BLF on Broadsoft:

   https://supportforums.cisco.com/docs/DOC-9977

Regards,

Patrick

----------

   Patrick Born | Technical Marketing Engineer (TME) – SPA SIP Endpoints
                   Use this reference document to locate SPA phone resources

1167
Views
0
Helpful
1
Replies
CreatePlease to create content