Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

spa525g2 connected in uc520

hi,

I have all my phones working except this spa525g2.

it's connected into the uc520... the phone gets no power. it's connected in port fa0/1/2

when I do

sh power inline I get this,

PowerSupply   SlotNum.   Maximum   Allocated       Status

-----------   --------   -------   ---------       ------

INT-PS           0        88.000    56.700          PS GOOD

Interface   Config   Device   Powered    PowerAllocated

---------   ------   ------   -------    --------------

Fa0/1/0     auto     Unknown  Off        0.000 Watts

Fa0/1/1     auto     IEEE-2   On         6.300 Watts

Fa0/1/2     auto     IEEE-0   On        15.400 Watts

Fa0/1/3     auto     IEEE-3   On         7.000 Watts

Fa0/1/4     auto     IEEE-3   On         7.000 Watts

Fa0/1/5     auto     IEEE-3   On         7.000 Watts

Fa0/1/6     auto     IEEE-3   On         7.000 Watts

Fa0/1/7     auto     IEEE-3   On         7.000 Watts

PowerSupply   SlotNum.   Maximum   Allocated       Status

-----------   --------   -------   ---------       ------

INT-PS           0        88.000    41.300          PS GOOD

Interface   Config   Device   Powered    PowerAllocated

---------   ------   ------   -------    --------------

Fa0/1/0     auto     Unknown  Off        0.000 Watts

Fa0/1/1     auto     IEEE-2   On         6.300 Watts

Fa0/1/2     auto     Unknown  Off        0.000 Watts

Fa0/1/3     auto     IEEE-3   On         7.000 Watts

Fa0/1/4     auto     IEEE-3   On         7.000 Watts

Fa0/1/5     auto     IEEE-3   On         7.000 Watts

Fa0/1/6     auto     IEEE-3   On         7.000 Watts

Fa0/1/7     auto     IEEE-3   On         7.000 Watts

meanwhile the phone stays down.

it keeps dong this none stop and I'm not sure why... I doubt the phone is bad but who knows...

anyone has seen this in the past?

I tried another port and another cable and I get the same thing, no power to the phone.

thanks.

1 REPLY
Hall of Fame Super Gold

spa525g2 connected in uc520

Faulty phone.

291
Views
0
Helpful
1
Replies
CreatePlease to create content