Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

SPA9000 and SPA8800 integration

I would like to help in integrating the SPA9000 with SPA8800.

The scenario I have is the following:

- 1 SPA9000
- 1 SPA8800
- 2 SPA525G (IPPhone)

All devices are connected to a switch 3560G PoE, the network has no VLAN configured and is dedicated to the telephone system.

I would like to integrate the system with a PSTN line for testing.

The SPA9000 is already registering the phones, making calls intrasite, but can not integrate with the SPA9000 SPA8800 to make external calls (PSTN)

1 REPLY
Cisco Employee

Re: SPA9000 and SPA8800 integration

Dear Sir;

This configuration is not supported (so no documentation) but my work properly if you dont require voicemail functionality.

Each SPA8800 Line shall be configured peer-to-peer to each SPA9000 line. Both devices should have a static IP address for this purpose. Remember to set No registration at both ends and use the right ports.

Regards
Alberto

725
Views
0
Helpful
1
Replies
CreatePlease to create content