Hi, I have a SPA9000 woking fine with IP Phones. External and Internal calls. Outbound and inbound.
I have no router in front, so no NAT or FW problems, SPA9000 is connected directly to a DSL Modem in WAN interface and then I have a Switch in LAN interface.
But my problem is with FXS Analog phones connected, When an external calls incoming if I configure SPA9k to rings FXS1 extension I have a very weird behavior, Sometimes when I pick up the phone it doesn't takes de call the first time, when finally connected the audio is only one-way (They can hear me, but I cannot hear them). Only a few times the audio is both ways.
IP Phones are working fine, the problem is only with FXS Analog phones.
Regional Settings was configured correctly acording with my location. I'm from Spain.
I tried different Phones, with the same result.
I attach some screenshots of Regional tab and FXS tab:
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...