Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

spa9000/spa400 register a phone through a vpn

Hi I have installed a spa9000/spa400 and a  WRV210 WirelessG VPN router, and a few weeks ago I installed

another WRV210 WirelessG VPN router in a remote office the VPN is enable and one phone was registered in the

local network and then it was moved to the remote site, the phone at the remote site display de name and the

extension and I can see the phone registered in the SPA9000 in the PBX status, but when I want to call from the

remote site to an extension in the other office it isn`t possible and when I press the speaker  it doesn`t make any

sound the model of the phone is SPA502G firmware 7.4.8, the vpn is enable and I can see the phone registered

in the SPA9000, thanks for you help. I don`t know if this is possible in this system.

1 REPLY
Cisco Employee

Re: spa9000/spa400 register a phone through a vpn

Dear Sir;

Are both sites using the same LAN domain? If the case, this should work without major issues, otherwise it will not work properly.

Regards
Alberto

750
Views
0
Helpful
1
Replies
CreatePlease to create content