I am transitioning from a SPA9000 to a UC520. I am trying to still use my SPA VoIP phones, I realize I can't use the Cisco Configuration Assistant to set them up, back I can manually via browser or front panel. I don't see in the running config on the UC520 the IP address or Port number used for the Proxy/Registar functions. The phones receive their IP via DHCP fine, they are in the correct VLAN 100, but they don't/can't register. I used the 10.1.1.1 address with a port of 5060, but that doesn't seem to work. Any help would be appreciated or documentation source.
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...