Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

SPC and firmware for Cisco SPA504 and SPA502

My company just recieved SPA525, SPA504 and SPA502 to deploy.  I have found firmware and SPC for SPA525.  However I am unable to locate SPA504/502 firmware and SPC.  Can someone tell me where I may download this at?

18 REPLIES
New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

l

Cisco Employee

Re: SPC and firmware for Cisco SPA504 and SPA502

Dear Sir;

SPC is attached. Regards
Alberto

New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

What happen with the CME-Locale for french language?

Tks.

Mario

New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

Check this out:

https://supportforums.cisco.com/docs/DOC-9931

Let us know,

Marcos

New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

This isn't like 7900 series phone. How can we push the language if we used the UC520?

Tks

Mario

New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

You will need CLI for this.

First, upload the French locale and English locale files to your UC500 and enter tthe following commands:

!

tftp-server flash:<<>> alias English_United_States/SCCP-dictionary.xml

tftp-server flash:<<>> alias French_France/SCCP-dictionary.xml

!

telephony-service

user-locale FR

network-locale FR

create cnf

!

Factory reset your SPA phone and reboot.

Thanks,

Marocs

New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

Marcos.

This is already done. I check the output  of the debug tftp events and all this files are opened and finished. My problem is even with the newest package for the UC520, I don't see any load for the firmware for the SPA504G. Can I use the load for the SPA525G or other?

A part of my phone display is in french an another part is an english. Here is the output of the debug;

Oct 15 18:43:52.053: TFTP: Looking for English_United_States/504-dictionary.xml
Oct 15 18:43:52.073: TFTP: Looking for French_France/504-dictionary.xml
Oct 15 18:43:52.129: TFTP: Looking for English_United_States/SCCP-dictionary.xml
Oct 15 18:43:52.129: TFTP: Opened system:/its/united_states/SCCP-dictionary.xml, fd 10, size 2740 for process 174
Oct 15 18:43:52.157: TFTP: Finished system:/its/united_states/SCCP-dictionary.xml, time 00:00:00 for process 174
Oct 15 18:43:52.229: TFTP: Looking for French_France/SCCP-dictionary.xml
Oct 15 18:43:52.229: TFTP: Opened system:/its/france/SCCP-dictionary.xml, fd 10, size 2852 for process 174
Oct 15 18:43:52.241: TFTP: Finished system:/its/france/SCCP-dictionary.xml, time 00:00:00 for process 174
Oct 15 18:43:54.313: TFTP: Looking for /SPA504G-cfg.xml

Here the output of sh ephone phone-load:

DeviceName        CurrentPhoneload       PreviousPhoneload      LastReset
=====================================================================
SEP0018B9FFDFD5   7.1.3a                 7.1.3a                 Cold+CMERequest
SEP0026CB3DBD0F    SCCP75.8-3-2S          SCCP75.8-3-2S         Reset-Restart

Tks.

Mario

New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

There is no firmware in the package for SPA500 because the manufacturing load is the latest one. Are you seeing any problems still with the localization?

Marcos

New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

The system is getting the files from the ITS directory. You need to specify the path to your files on the flash. The commands were in my previous post.


Marcos

New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

Marcos,

I agree with you but I can't find the dictionnary for the SPA504G for UC520. The only thing I found is the latest load (spa5x5-7-1-3c.bin). Where can I find the dictionnary (complete package) and then but those en flash with the correct tftp-server localization?

Tks.

Mario

New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

I posted this earlier on this thread:

https://supportforums.cisco.com/docs/DOC-9931

SPA500 uses the same files as SPA9XX.

Marcos

New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

Just to confirm the files:

French: frS_FR_v615

English: enS_US_v615

Is it right?

Tks.

Mario

New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

Yes, those are the files.


Marcos

New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

Marcos,

Most of the menus are in french but the languages files are still pulled fron the ITS. Here are my config :

FLASH

168      46202 Oct 16 2009 12:27:54 -04:00 frs_fr_v615.xml
169      42334 Oct 16 2009 12:57:30 -04:00 ens_us_v615.xml

TFTP-SERVER FLASH:

tftp-server flash:frs_fr_v615.xml alias French_France/SCCP-dictionary.xml
tftp-server flash:ens_us_v615.xml alias English_United_States/SCCP-dictionary.xml

TELEPHONY-SERVICE

user-locale FR
network-locale FR

and I done - create cnf-files

OUTPUT OF THE DEBUF TFTP EVENTS

Oct 19 11:35:17.175: TFTP: Looking for SEP0018B9FFDFD5.cnf.xml
Oct 19 11:35:17.935: TFTP: Opened system:/its/XMLDefault504G.cnf.xml, fd 10, size 1065 for process 174
Oct 19 11:35:18.003: TFTP: Finished system:/its/XMLDefault504G.cnf.xml, time 00:00:00 for process 174
Oct 19 11:35:18.003: TFTP: Looking for RingList.xml
Oct 19 11:35:18.031: TFTP: Opened flash:RingList.xml, fd 10, size 2823 for process 282
Oct 19 11:35:18.043: TFTP: Finished flash:RingList.xml, time 00:00:00 for process 282
Oct 19 11:35:18.051: TFTP: Looking for DistinctiveRingList.xml
Oct 19 11:35:18.075: TFTP: Opened flash:DistinctiveRingList.xml, fd 10, size 2823 for process 174
Oct 19 11:35:18.087: TFTP: Finished flash:DistinctiveRingList.xml, time 00:00:00 for process 174
Oct 19 11:35:18.139: TFTP: Looking for English_United_States/504-dictionary.xml
Oct 19 11:35:18.159: TFTP: Looking for French_France/504-dictionary.xml
Oct 19 11:35:18.407: TFTP: Looking for English_United_States/SCCP-dictionary.xml
Oct 19 11:35:18.411: TFTP: Opened system:/its/united_states/SCCP-dictionary.xml, fd 10, size 2740 for process 174
Oct 19 11:35:18.419: %IPPHONE-6-REG_ALARM: Name=SEP0018B9FFDFD5  Load=7.1.3c Last=Hard+Unknown
Oct 19 11:35:18.423: TFTP: Finished system:/its/united_states/SCCP-dictionary.xml, time 00:00:00 for process 174
Oct 19 11:35:18.495: TFTP: Looking for French_France/SCCP-dictionary.xml
Oct 19 11:35:18.495: TFTP: Opened system:/its/france/SCCP-dictionary.xml, fd 10, size 2852 for process 174
Oct 19 11:35:18.507: TFTP: Finished system:/its/france/SCCP-dictionary.xml, time 00:00:00 for process 174
Oct 19 11:35:18.619: %IPPHONE-6-REGISTER: ephone-5:SEP0018B9FFDFD5 IP:10.1.1.11 Socket:2 DeviceType:Phone has registered.

What do you think?

Tks.

Mario

New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

Marcos,

What do you think concerning my last post? Is it normal?

Tks.

Mario

Re: SPC and firmware for Cisco SPA504 and SPA502

When in SPCP mode, the phone gets information about what text to display, so I am not surprised that it would be grabbing some language files from the UC.  Are you still having problems?

New Member

Re: SPC and firmware for Cisco SPA504 and SPA502

Hi Steven,

Yes, we still have problem. He phone still look in the ITS and load the dictionnary.xml from there instead of flash.

What do you think?

Tks.

Mario

Re: SPC and firmware for Cisco SPA504 and SPA502

I see the problem.  Let me forward this along.

8675
Views
0
Helpful
18
Replies
CreatePlease to create content