Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Speed dial using press and hold line key on 500S sidecar

Speed dial: press and hold idle line key

Will this functionality be enable with the 500S side car ?

3 REPLIES
Community Member

Re: Speed dial using press and hold line key on 500S sidecar

If you have configured this in the extended function parameter of the phone (in phone tab) then you should see the same functionality in the sidecar.

Community Member

Re: Speed dial using press and hold line key on 500S sidecar

Of course by configuring this functionality through the web interface it works well. But you can, on each phone of the spa5xx serie, by pressing 3 seconds on an unused line add manualy a spedd dial, on the 500S sidecar you cannot do it manually.

Community Member

Re: Speed dial using press and hold line key on 500S sidecar

Thank you for the input, I'll submit a feature request on this issue.

592
Views
0
Helpful
3
Replies
CreatePlease to create content