I have an intersting scenario whereby a select few extensions require a different state area code applied when dialing that specific regions local numbers.
So to explain that further, these select few extensions are virtualy located in state 02xxxx xxxx. The UC540 is located in state 03xxxx xxxx. When these 02 extensions want to dial a local call (8 digits) the users do not want to have to manually add 02 to the number before dialing. As far as they are concerned they are "virtually" located in the 02 state - so i agree with them . But I have hit the following hurdle.
Now this sounds pretty simple to fix using a translation rule to add the 02 digits to the Called number; but the problem I have is that I had to create a translation rule already for these "02" extensions to have a caller-ID on the 02xxxx xxxx state range, and not the 03xxxx xxxx like the rest of the extensions.
The following is the existing rules.In summary this rule ensures that only the "virtual" extensions (range between 3381 to 3388) get a callerID of 0212345678. The rest get the normal 0311111111 callerID.
......but make it only applicable to those extensions 3381 to 3388.
Its almost like I need a rule that allows me to select a source and destination in the same rule i.e .a calling extension (3381 - 3388) dialing an 8 digit number (local call on 02 state), then ammend a 02 to the beginning of the called number, and still preserve the CallerID that is in place.
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...