We have a customer with a UC520 (8 user). They complain almost monthly that the time on the phones speeds up. Say the PC says "1:20" the phone will say "1:28". I have synced the UC to a local computer and assigned it as the NTP. This still happens.
Any ideas why? Is there a better time server to attach to for time?
*Clock is unsynchronized, stratum 16, no reference clock*
Statum 16 is way way down on the list of NTP servers. You are getting your time from the 16th server in the pool. I would choose a different pool or different server. You should be pulling your time from a stratum 8 server at maximum. BTW stratum 16 is the last server in the pool so it might not even be responding to your requests.
You know I overlooked something in your configuration. I would try setting up your UC500 to be a peer. I have run into issues like this with different IOS versions
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...